 2003 stratus 4 door hid problems |
  |
 Dec 19 2009, 11:29 AM
Post
#1
|
|
|
Just joined...  Group: Members Posts: 17 Joined: 14-December 06 Member No.: 4073 2001 Ford Taurus SES sedan 3.0 24v DOHC / auto silver  |
hey guys just put some vvme 10,000k dual beam hids in my boys 03 sxt 4dr.
the high beam light is stuck on and the beams dont change when you hit the high beam button, what could be the problem? is there a special resistor needed or something? we have changed the ballasts and the ground wire and nothings fixed it, its blinding everyone!!! help us out. thanks |
 |
 
|
|
Dec 20 2009, 11:13 AM
Post
#2
|
|
|
Member Group: Members Posts: 227 Joined: 8-January 08 Member No.: 4571 2004 Chrysler Sebring LX Sedan 2.4 I4 / 4spd Auto Gray |
if its on a relay system, try switching the leads around on the connector that connects to the stock harness
|
|
|
|
|
Dec 21 2009, 10:01 PM
Post
#3
|
|
|
New Member Group: Members Posts: 37 Joined: 29-October 09 From: Cincinnati Ohio Member No.: 5473 2001 Dodge Stratus R/T R/T Coupe 3.0L / 5 Speed Red |
QUOTE (Shnibz @ Dec 20 2009, 12:13 PM)  if its on a relay system, try switching the leads around on the connector that connects to the stock harness I had a similar problem, though it is not exact. I found that there were two extensions each running from the harness to the very small fuses on the harness. I unplugged these, replaced the harness, and the system works perfectly. |
|
|
|
|
| Lo-Fi Version | Time is now: 10th September 2010 - 05:59 AM |